Stainless Steel 200KHz Ultrasonic Transducer for 100M Depth Measurement
Product Description
Stainless Steel 200KHz Ultrasonic Transducer for 100M Depth Measurement
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
200KHz underwater ultrasonic transducer |
|
|
Model |
PHW-200-AS |
||
Frequency |
200KHz±5% |
||
Detection Distance |
0.60 ～ 100m |
||
Minimum Parallel lmpedance |
3000Ω±20％ |
||
1200pF±20％ @1KHz |
|||
Sensitivity |
No load driving voltage:：200 Vpp、Distance:0.7m、 Amplitude:200 mV |
||
-10～+50℃ |
|||
(Beamwidth)Half-power Beam Width@-3dB:16.7°±10%， Sharp Angle40°±10% |
|||
Housing Material |
304 |
||
usage |
submarine range finder |
||
See product structure drawing for details |
|||
Protection Level |
IP68 |
||
Weight |
62g±5％（wire length：2.5m） |
||
Wiring Instructions |
White: transducer +, black: transducer -; |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor