75kHz Underwater Ultrasonic Depth Sensor for Depth Measurement
Product Description
75kHz Underwater Ultrasonic Depth Sensor for Depth Measurement
Applications:
Surface -mount ,Range of up to 4m enables reliable long-range detection.
Suitable for distance,liquid level,level measurement ,perception,anti-collision field high protection level can be used outdoors.
Parameters：
Ultrasonic sensor |
Technical data |
General Specifications |
|
Sensing distance |
280…4000mm(200---3000mm) |
Adjustment range |
280…4000mm |
Unusable area |
0…240mm |
Standard target plate |
100mm×100mm |
Transducer frequency About |
75 kHz |
Response delay About |
125ms |
Indicators/Operating means |
|
LED Blue |
|
Electrical specifications |
|
Operating voltage UB |
10…30VDC ripple10%ss |
Power consumption P0 |
≤900 mW |
Output |
|
Output type |
RS232/485 |
Resolution |
|
Deviation of the characteristic |
≤0.2% of full-scale value |
Repeat accuracy |
±0.1% of full-scale value |
Load impedance |
0…500 Ohm |
Maximum switching current |
mA |
Temperature influence |
≤2% from full-scale value |
Ambient conditions |
|
Ambient temperature |
-25…70℃ |
Storage temperature |
-40…85℃ |
Mechanical specifications |
|
Protection grade |
IP67 |
Connection |
Connector M12x1,4-PIN |
Material |
|
Housing |
brass,nickel-plated |
Transducer |
epoxy resin/hollow glass sphere |
Weight |
150g |
Compliance with standards and Directives |
|
Standard conformity |
EN 60947-5-2:2007 |
IEC 60947-5-2:2007
Dimension:
Notice:
1. Basically, there are two versions of ordinary blind zone and small blind zone for each type, and you can contact us if you need different ranges and blind zones;
2. Each type basically has analog output: 0-5V, 0-10V, 0-20mA, 4--20mA ;
Digital output: RS232/485, UART TTL and I2C and other output modes ,they are optional;
3. Most types has high voltage series (10---30V) and low voltage series (3.6---5V).