49KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Sensor
Product Description
49KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Sensor
Technical parameters：
Items |
Technical Parameters |
Image |
|
Name |
49KHz anti-corrosive transducer PB type(separated type) |
|
|
Model |
PHA-49-08PB-F |
||
Frequency |
49KHz±5% |
||
Detection Distance |
0.4～8m |
||
Minimum Parallel lmpedance |
390Ω±20％ |
||
3400pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：750Vpp，Distance:0.6m， Echo Amplitude：400mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
|
(Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:18°±4 |
||
Housing Material |
POM、PVDF |
||
Usage |
Ultrasonic level gauge,Monitoring,Crashproof, Security |
||
The lifting thread:M32*1.5, Bottom with thread : M60×2 or G2A |
|||
Protection Level |
IP68 |
||
Weight |
940g±5％（ Length：10m） |
||
Wiring Instructions |
separated type（four-wire）：Red: transducer+、white： transducer-、blue，black:temperature sensor（MF58）； separated type（Three-wire）：Red: transducer+、blue:temperature sensor+、black： Common Line－； |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Test Circuit Schematic of Transducer:
Application of Ultrasonic Level Sensor
ultrasonic / level sensors measure distance by using ultrasonic waves.The sensor head emits an ultrasonic wave and receives the wave reflected back from the target. ultrasonic / level sensors measure the distance to the target by measuring the time between the emission and reception.
Application Image of Ultrasonic Level Sensor：