200KHz Ultrasonic Transducer for Ultrasonic Wind Sensor
Product Description
200KHz Ultrasonic Transducer for Ultrasonic Wind Sensor
Items |
Technical Parameters |
Image |
|
Name |
200KHz ultrasonic transducer |
|
|
Model |
PHA-200-01KC |
||
Frequency |
200KHz±5% |
||
Detection Distance |
0.10～1.5m |
||
Minimum Parallel lmpedance |
2300Ω±20％ |
||
370pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：40mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
|
(Beamwidth) Half-power Beam Width@-3dB:10°±2， Sharp Angle:23°±4 |
||
Housing Material |
POM |
||
Usage |
anemorumbometer, gas flowmeter |
||
thread:M12*1.5 |
|||
Protection Level |
IP68 |
||
Weight |
8.7g±5％（ Length：10cm） |
||
Wiring Instructions |
integrated type：connector：Red+，White-，Black: shielded wire； temp sensor is optional |
||
Admittance Curve |
Product Structure Diagram |
||
|
|
||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application Image: