200KHz Ultrasonic Transducer for Ultrasonic Anemorumbometer
Product Description
200KHz Ultrasonic Transducer for Ultrasonic Anemorumbometer
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
200KHz ultrasonic transducer |
|
|
Model |
PHA-200-01KF |
||
Frequency |
200KHz±5% |
||
Detection Distance |
0.10～1.5m |
||
Minimum Parallel lmpedance |
455Ω±20％ |
||
1410pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude:30mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
|
(Beamwidth) Half-power Beam Width@-3dB:10°±10%， Sharp Angle:24°±10% |
||
Housing Material |
POM |
||
Usage |
anemorumbometer,ultrasonic gas flowmeter |
||
thread：M12*1.5 |
|||
Protection Level |
IP68 |
||
Weight |
10g±5％（Length：25cm） |
||
Wiring Instructions |
integrated type：connector：Red+，White-，Black: shielded wire； |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor
Application Image :