1MHz Brass Heat Meter Transducer for Ultrasonic Flowmeter
Product Description
1MHz Brass Heat Meter Transducer for Ultrasonic Flowmeter
Items |
Technical Parameters |
Image |
|
Name |
Ultrasonic transducer for heat flowmeter ( brass case) |
|
|
Model |
PL-1M-01J |
||
Frequency |
1MHz±30KHz |
||
Detection Distance |
0.05 ～ 3m |
||
Minimum Parallel lmpedance |
50Ω±20％ |
||
1200pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：24Vpp、Distance：0.3m、 Echo Amplitude: 320mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:5°±1， Sharp Angle：12°±2 |
|||
Housing Material |
brass |
||
Usage |
Ultrasonic flowmeter,submarine range finder |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
17g±5％（Length：25cm） |
||
Wiring Instructions |
Red:transducer+，White:transducer-,Black: shielded wire （temperature sensor wire is optional）
|
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding