200KHz Ultrasonic Transducer for Ultrasonic Anemometer Sensor

Product Description

200KHz Ultrasonic Transducer for Ultrasonic Anemometer Sensor

Specification:

Items	Technical Parameters		Image
Name	200KHz transducer
Model	PHA-200-01A
Frequency	200KHz±5%
Detection Distance	0.10～1.5m
Minimum Parallel lmpedance	1005Ω±20％
Capacitance	730pF±20％ @1KHz
Sensitivity	Driving Voltage：850Vpp，Distance:0.3m， Echo Amplitude：40mV
Operating Voltage	Peak Voltage＜1000VPP
Operating Temperature	-40～+80℃
Pressure	≤3Kilos or 0.3MPa
Angle	(Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:17°±4
Housing Material	POM
Usage	ultrasonic anemometer sensor Ultrasonic level gauge,Monitoring,
Installation Dimension	SIZE：14*20
Protection Level	IP68
Weight	9g±5％（ Length：25cm）
Wiring Instructions	Integrated interface：Red+，White-，Black: shielded wire （ default : without temperature sensor）
Admittance Curve		Product Structure Diagram

Application for Ultrasonic Anemometer Sensor:

Ultrasonic anemometer has all digital signal detection, high accuracy, automatically heating ability to remove snow and ice .It is the anemometer with real-time measurement of wind speed, wind direction and acoustic temperature.Ultrasonic anemometer takes four ultrasonic sensors in the two-dimensional plane to send and receive ultrasonic signals; it is an instrument using the difference of the ultrasonic spread time in the air to measure wind speed and wind direction.Ultrasonic anemometer calculates the wind speed according to the difference of the sound spread time in the air; then calculates the temperature according to the physical relationship between temperature and sound speed.

Application Image of Ultrasonic Anemometer Sensor:

200KHz Ultrasonic Transducer for Ultrasonic Anemometer Sensor

Product Description

Related Products