Titanium Alloy Housing 500KHz Ultrasonic Transducer Flow Measurement for Ultrasonic Flowmeter
Product Description
Titanium Alloy Housing 500KHz Ultrasonic Transducer Flow Measurement for Ultrasonic Flowmeter
Items |
Technical Parameters |
Image |
|
Name |
500KHz transducer |
|
|
Model |
PHA-500F-01 |
||
Frequency |
500KHz±25KHz |
||
Detection Distance |
0.3～30m |
||
Minimum Parallel lmpedance |
220Ω±20％ |
||
1200pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：24 Vpp、Distance：0.3m、 Echo Amplitude:500 mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:7.5°±1， Sharp Angle：18°±2 |
|||
Housing Material |
Titanium alloy |
||
Usage |
Ultrasonic flowmeter,submarine range finder |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
90g±5％（Length：1M） |
||
Wiring Instructions |
Red:transducer+，White:transducer-,Black: shielded wire （without temperature sensor ）） |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Ultrasonic Flow Meter Application:
An ultrasonic flow meter can be defined as, a meter that is used to measure liquid velocity with ultrasound to analyze the volume of liquid flow. This is a volumetric flow meter that needs bubble or minute particles within the liquid flow. These meters are suitable in the applications of wastewater but they will not work with drinking/distill water. So this type of flow meter is ideal for the applications wherever chemical compatibility, low maintenance, and low-pressure drop are required.