500KHz Ultrasonic Transducer for Depth Measurement
Product Description
500KHz Ultrasonic Transducer for Depth Measurement
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
500KHz ultrasonic transducer |
|
|
Model |
PHW-500-20B |
||
Frequency |
500KHz±5% |
||
Minimum Parallel lmpedance |
12Ω±20％ |
||
7500pF±20％ @1KHz |
|||
Sensitivity |
Without load Driving Voltage24V，Distance:0.3m、 Echo Amplitude:2.5 V |
||
-40～+80℃ |
|||
≤10Kilos or 1MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB：3.0°±10%； Sharp Angle:7.2°±10%； |
|||
Housing Material |
ABS |
||
Usage |
Ranging, positioning |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
750g±5％（Length：10m） |
||
Wiring Instructions |
（three-wire）：Red:transducer+，Blue: temperature sensor +, black: public -; |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor