500KHz Underwater Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter
Product Description
500KHz Underwater Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
500KHz underwater ultrasonic transducer |
|
|
Model |
PHW-500-01E |
||
Frequency |
500KHz±5% |
||
Detection Distance |
0.3～30m |
||
Minimum Parallel lmpedance |
120Ω±20％ |
||
2000pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：20Vpp、Distance:0.3m、 Echo Amplitude：400 mV |
||
-40～+80℃ |
|||
≤10Kg or1MPa |
|||
|
(Beamwidth) Half-power Beam Width@-3dB:3.3°±10%， Sharp Angle：7.8°±10% |
||
Housing Material |
POM |
||
Usage |
Ultrasonic flowmeter, underwater rangefinder |
||
See the product structure drawing |
|||
Protection Level |
IP68 |
||
Weight |
78g±5％（Length：2m） |
||
Wiring Instructions |
Red: transducer +, white: transducer -, black: shielded wire; ( temperature sensor is optional) |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor