1MHz Piezoelectric Ultrasonic Flowmeter Transducer for Flow Measurement
Product Description
1MHz Underwater Piezoelectric Ultrasonic Flowmeter Transducer for Flow Measurement
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
1MHz underwater ultrasonic transducer |
|
|
Model |
PHW-1M-01RA |
||
Frequency |
1MHz±5% |
||
Detection Distance |
0.05 ～ 3m |
||
Minimum Parallel lmpedance |
22Ω±20％ |
||
3100pF±20％ @1KHz |
|||
Sensitivity |
driving voltage:24 V、Distance:0.3m、Echo Amplitude:700mV |
||
-40～+80℃ |
|||
≤10Kilos or 1MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:2.9°±10%， Sharp Angle:6.8°±10% |
|||
Housing Material |
304+PI |
||
usage |
ultrasonic flowmeter |
||
See product structure drawing for details |
|||
Protection Level |
IP68 |
||
Weight |
720g±5％（wire length：10m） |
||
Wiring Instructions |
White: transducer +, black: transducer -, shield wire; ( temperature sensor is optional) |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor
Factory Show :