110KHz Piezoelectric Ultrasonic Transducer for Ultrasonic Flowmeter Transducer for Flow Measurement
Product Description
110KHz Piezoelectric Ultrasonic Transducer for Ultrasonic Flowmeter Transducer for Flow Measurement
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
110KHz underwater ultrasonic transducer |
|
|
Model |
PHA-110-EA |
||
Frequency |
110KHz±10KHz |
||
Detection Distance |
0.6～40m |
||
Minimum Parallel lmpedance |
700Ω±20％ |
||
2000pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：500Vpp、Distance：0.8m、 echo Amplitude:1.0 V |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
Beamwidth)Half-power Beam Width@-3dB:18°±2， Sharp Angle:44°±5 |
|||
Housing Material |
POM |
||
Usage |
Ultrasonic flowmeter,submarine range finder |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
107g±5％（Length：2m） |
||
Wiring Instructions |
Red: transducer +, white: transducer -, black: shielded wire; ( temperature sensor is optional) |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor