200KHz Ultrasonic Transducer Wind Speed Direction for Ultrasonic Weatherstation Instrument
Product Description
200KHz Ultrasonic Transducer Wind Speed Direction for Ultrasonic Weatherstation Instrument
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
200KHz ultrasonic transducer |
|
|
Model |
PHA-200-01KI |
||
Frequency |
200KHz±5% |
||
Detection Distance |
0.10～1.5m |
||
Minimum Parallel lmpedance |
600Ω±20％ |
||
800pF±20％ @1KHz |
|||
Sensitivity |
load driving voltage:800Vpp，Distance:0.3m， Echo Amplitude:25mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:8.4°±10%， Sharp Angle:20°±10% |
|||
Housing Material |
POM |
||
usage |
Wind speed and direction meter, gas flowmeter |
||
dimension |
thread：M8*1 |
||
Protection Level |
IP68 |
||
Weight |
10g±5％（wire length：25cm） |
||
Wiring Instructions |
interface: red: transducer +, white: transducer -, black: shielded wire, ( temperature sensor is optional) |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor
Application Image :