50KHz Explosionproof Ultrasonic Range Transducer for Ultrasonic Level Gauge
Product Description
50KHz Explosionproof Ultrasonic Range Transducer for Ultrasonic Level Gauge
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
|
||
Model |
PHA-49-08C-FB |
||
Frequency |
49KHz±5% |
||
Detection Distance |
0.4～8m |
||
Minimum Parallel lmpedance |
210Ω±20％ |
||
4000pF±20％ @1KHz |
|||
Sensitivity |
load driving Voltage：750Vpp，Distance:0.6m， Echo Amplitude:380mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:5°±10%， Sharp Angle:13°±10% |
|||
Housing Material |
ABS |
||
usage |
Ultrasonic level gauge, ultrasonic anti-collision, ultrasonic rangefinder |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
650g±5％ |
||
Wiring Instructions |
Integrated interface (3PIN,2.54mm terminal) : red positive, white negative, black shield wire; Interface (3PIN,2.0mm terminal) : white and black for temperature sensor wire (MF58); |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor