50KHz Anti Corrosive Explosion-proof Ultrasonic Transducer Distance Measurement for Ultrasonic Rangefinder
Product Description
50KHz Anti Corrosive Explosion-proof Ultrasonic Transducer Distance Measurement for Ultrasonic Rangefinder
Technical parameters:
Items |
Technical Parameters |
Image |
|
Name |
49KHz Anti corrosive and explosion-proof transducer |
|
|
Model |
PHA-49-08FA-FB |
||
Frequency |
49KHz±5% |
||
Detection Distance |
0.4～8m |
||
Minimum Parallel lmpedance |
170Ω±20％ |
||
3700pF±20％ @1KHz |
|||
Sensitivity |
load driving Voltage：750Vpp，Distance:0.6m、Echo Amplitude:170mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
(Beamwidth)Half-power Beam Width@-3dB:9°±10%， Sharp Angle:20°±10% |
|||
Housing Material |
POM、PTFE |
||
usage |
Ultrasonic level gauge, ultrasonic anti-collision, ultrasonic rangefinder |
||
Checking product structure diagram below |
|||
Protection Level |
IP68 |
||
Weight |
710g±5％（wire length:10M） |
||
Wiring Instructions |
Integrated interface (3PIN,2.54mm terminal) : red positive, white negative, black shield wire; Interface (3PIN,2.0mm terminal) : white and black for temperature sensor wire (MF58); |
||
Admittance Curve |
Product Structure Diagram |
||
|
|||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor