200KHz Stainless Steel Ultrasonic Transducer for Wind Speed Sensor
Product Description
200KHz Stainless Steel Ultrasonic Transducer for Wind Speed Sensor
Technical parameters：
Items |
Technical Parameters |
Image |
|
Name |
200KHz ultrasonic transducer |
|
|
Model |
PHA-200-01L |
||
Frequency |
200KHz±5% |
||
Detection Distance |
0.10～1.5m |
||
Minimum Parallel lmpedance |
320Ω±20％ |
||
500pF±20％ @1KHz |
|||
Sensitivity |
Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：30mV |
||
-40～+80℃ |
|||
≤3Kilos or 0.3MPa |
|||
|
(Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:20°±4 |
||
Housing Material |
stainless steel |
||
Usage |
ultrasonic transducer，anemorumbometer， |
||
IP68 |
|||
Protection Level |
13g±5％（ Length：20cm） |
||
Weight |
integrated type：connector：Red+，White-，Black: shielded wire |
||
Admittance Curve |
Product Structure Diagram |
||
|
|
||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring