content is empty!
Availability: | |
---|---|
GBYD5
GBYD5
Industrial Monitoring Iepe Accelerometers To Measure Displacement
Feature:
Built-in IEPE amplifier
Matching with handheld vibration monitor
Can be equipped with long probe for vibration test
Specifications:
Sensitivity(20±5℃) | 50mV/g±5% |
Measurement range (peak) | 100g |
Max Transverse Sensitivity | ≤5 % |
Frequency Response(±10%) | 1~10,000 Hz |
Mounting resonant frequency | 30,000 Hz |
temperature response | Check temperature curve below |
operating temperature range | -20~+120 ℃ |
Impact limit | 5000g |
Power supply (constant current source) | 12~24V(DC) |
working current | +2~+10 mA(typically 4 mA ) |
Output signal (peak) | ≤±5V |
noise | <2 mg |
output impedance | <100 Ω |
Max External bias | 7±1V |
Weight | 35 g |
shell isolation | ≥100M Ω |
case material | stainless steel |
install | M5 |
sensitive material | Piezo ceramics |
physical design | shear |
output mode | Four cores: 1 pin (empty), 2 pins (empty), 3 pins (GND), 4 pins (OUT) |
parts and auxiliary equipment | Four-core wire (optional) |
Sensor certificate | Calibration parameters, frequency response curve |
Image:
Industrial Monitoring Iepe Accelerometers To Measure Displacement
Feature:
Built-in IEPE amplifier
Matching with handheld vibration monitor
Can be equipped with long probe for vibration test
Specifications:
Sensitivity(20±5℃) | 50mV/g±5% |
Measurement range (peak) | 100g |
Max Transverse Sensitivity | ≤5 % |
Frequency Response(±10%) | 1~10,000 Hz |
Mounting resonant frequency | 30,000 Hz |
temperature response | Check temperature curve below |
operating temperature range | -20~+120 ℃ |
Impact limit | 5000g |
Power supply (constant current source) | 12~24V(DC) |
working current | +2~+10 mA(typically 4 mA ) |
Output signal (peak) | ≤±5V |
noise | <2 mg |
output impedance | <100 Ω |
Max External bias | 7±1V |
Weight | 35 g |
shell isolation | ≥100M Ω |
case material | stainless steel |
install | M5 |
sensitive material | Piezo ceramics |
physical design | shear |
output mode | Four cores: 1 pin (empty), 2 pins (empty), 3 pins (GND), 4 pins (OUT) |
parts and auxiliary equipment | Four-core wire (optional) |
Sensor certificate | Calibration parameters, frequency response curve |
Image:
Products | About Us | News | Markets and Applications | FAQ | Contact Us