content is empty!
Availability: | |
---|---|
CA-YD-191
CA-YD-191
High Sensitivity Monoaxial IEPE Accelerometers Transducer
Feature:
Built-in IC preamplifier
Matched with coaxial cable and IEPE Conditioner
Simplify measurement system
Small size, High sensitivity
Specifications:
Sensitivity(20±5℃) | 100mV/g |
Measurement Range | 50 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 1 to 7,000 Hz |
Mounting Resonance Frequency | 40,000 Hz |
Polarity | Positive |
Operating Temp. Range | -40 to +120 ℃ |
Shock Limit | 2,000g |
Operating Voltage (constant-current source) | +18 to +28 V(DC) |
Operating Current | +2 to +10 mA (typical 4 mA) |
Output Signal (peak) | ≤6V |
Noise(1 to 20kHz) | <0.5 mg |
Base Strain Sensitivity | 0.2mg/με |
Magnetic Sensitivity | 1.5g/T |
Thermal Transient Sensitivity | 10mg/℃ |
Output Impedance | <100 Ω |
DC Offset Voltage | 12±2 VDC |
Weight | 8g |
Case Material | Stainless steel |
Mounting Method | M5 |
Sensing Element | PZT-5 |
Structural Design | Loop shear |
Output | L5(side,10-32 selectable) |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M5 screw, Protection cap | one |
Double-ended L5(2m) STYV-1 | one |
Image:
Circuit diagram
Typical Temperature Response
Typical Frequency Response
High Sensitivity Monoaxial IEPE Accelerometers Transducer
Feature:
Built-in IC preamplifier
Matched with coaxial cable and IEPE Conditioner
Simplify measurement system
Small size, High sensitivity
Specifications:
Sensitivity(20±5℃) | 100mV/g |
Measurement Range | 50 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 1 to 7,000 Hz |
Mounting Resonance Frequency | 40,000 Hz |
Polarity | Positive |
Operating Temp. Range | -40 to +120 ℃ |
Shock Limit | 2,000g |
Operating Voltage (constant-current source) | +18 to +28 V(DC) |
Operating Current | +2 to +10 mA (typical 4 mA) |
Output Signal (peak) | ≤6V |
Noise(1 to 20kHz) | <0.5 mg |
Base Strain Sensitivity | 0.2mg/με |
Magnetic Sensitivity | 1.5g/T |
Thermal Transient Sensitivity | 10mg/℃ |
Output Impedance | <100 Ω |
DC Offset Voltage | 12±2 VDC |
Weight | 8g |
Case Material | Stainless steel |
Mounting Method | M5 |
Sensing Element | PZT-5 |
Structural Design | Loop shear |
Output | L5(side,10-32 selectable) |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M5 screw, Protection cap | one |
Double-ended L5(2m) STYV-1 | one |
Image:
Circuit diagram
Typical Temperature Response
Typical Frequency Response
Products | About Us | News | Markets and Applications | FAQ | Contact Us