 |
| Quantity: | |
|---|---|
PHA-40-12B-F
Piezohannas
PHA-40-12B-F
40KHz Piezoelectric Ultrasonic Transducer Circuit for Level Measurement
Specification:
Items | Technical Parameters | Image | |
Name | 40KHz Ultrasonic transducer |
| |
Model | PHA-40-12B-F | ||
Frequency | 40KHz±5% | ||
Detection Distance | 0.5～12m | ||
Minimum Parallel lmpedance | 4400Ω±20％ | ||
4600pF±20％ @1KHz | |||
Sensitivity | load driving Voltage：700Vpp，Distance:0.6m， Echo Amplitude:600mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:9°±10%， Sharp Angle:21°±10% | |||
Housing Material | POM | ||
Usage | Ultrasonic level gauge, monitoring, anti - collision, security | ||
Protection Level | IP68 | ||
Weight | 880g±5％（10M） | ||
Wiring Instructions | separated type（four-wire）：Red: transducer+、white： transducer-、blue，black:temperature sensor（MF58）；separated type（Three-wire）：Red: transducer+、blue:temperature sensor+、black： Common Line－； | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Ultrasonic Level Measurement Application:
In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which then reflects them back.The elapsed time from emission to reception of the signals is proportional to the level in the tank. Ultrasonic sensors are ideal for simple standard applications, both for liquids and for solids.
Driving Circuit :
40KHz Piezoelectric Ultrasonic Transducer Circuit for Level Measurement
Specification:
Items | Technical Parameters | Image | |
Name | 40KHz Ultrasonic transducer |
| |
Model | PHA-40-12B-F | ||
Frequency | 40KHz±5% | ||
Detection Distance | 0.5～12m | ||
Minimum Parallel lmpedance | 4400Ω±20％ | ||
4600pF±20％ @1KHz | |||
Sensitivity | load driving Voltage：700Vpp，Distance:0.6m， Echo Amplitude:600mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:9°±10%， Sharp Angle:21°±10% | |||
Housing Material | POM | ||
Usage | Ultrasonic level gauge, monitoring, anti - collision, security | ||
Protection Level | IP68 | ||
Weight | 880g±5％（10M） | ||
Wiring Instructions | separated type（four-wire）：Red: transducer+、white： transducer-、blue，black:temperature sensor（MF58）；separated type（Three-wire）：Red: transducer+、blue:temperature sensor+、black： Common Line－； | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Ultrasonic Level Measurement Application:
In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which then reflects them back.The elapsed time from emission to reception of the signals is proportional to the level in the tank. Ultrasonic sensors are ideal for simple standard applications, both for liquids and for solids.
Driving Circuit :
