 |
| Quantity: | |
|---|---|
PHW-10M-01B
Piezohannas
PHW-10M-01B
10MHz Underwater Ultrasonic Transducer for Ultrasonic Doppler Flowmeter
Technical parameters:
Items | Technical Parameters | Image | |
Name | 10MHz underwater ultrasonic transducer |
| |
Model | PHW-10M-01B | ||
Frequency | 10MHz±5% | ||
Detection Distance | 0.005 ～ 0.3m | ||
Minimum Parallel lmpedance | |||
Capacitance | |||
Sensitivity | |||
Operating Voltage | Peak Voltage＜Vpp | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤10Kilos or 1MPa | ||
Angle | (Beamwidth)Half-power Beam Width@-3dB:1.1°±10%， Sharp Angle:2.6°±10% | ||
Housing Material | |||
Usage | Doppler current meter, underwater distance | ||
Installation Dimension | Checking product structure diagram below | ||
Protection Level | IP68 | ||
Weight | 10g±5％ | ||
Wiring Instructions | Red+，White-，Black: shielded wire； （temperature sensor is optional） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Doppler Effect Ultrasonic Flow meter Application:
The Doppler Effect Ultrasonic Flow meter use reflected ultrasonic sound to measure the fluid velocity. By measuring the frequency shift between the ultrasonic frequency source, the receiver, and the fluid carrier, the relative motion are measured.The Doppler flowmeter converts the measured frequency shift into a volumetric flow rate. The velocity of flow in the pipe is calculated using the frequency shift, the original frequency of the ultrasonic signal, the velocity of the sound through the emitter material, and the sine of the angle of the signal into the liquid. Once the velocity is known, the volumetric flow rate can be easily calculated by multiplying the velocity by the area of the pipe.
10MHz Underwater Ultrasonic Transducer for Ultrasonic Doppler Flowmeter
Technical parameters:
Items | Technical Parameters | Image | |
Name | 10MHz underwater ultrasonic transducer |
| |
Model | PHW-10M-01B | ||
Frequency | 10MHz±5% | ||
Detection Distance | 0.005 ～ 0.3m | ||
Minimum Parallel lmpedance | |||
Capacitance | |||
Sensitivity | |||
Operating Voltage | Peak Voltage＜Vpp | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤10Kilos or 1MPa | ||
Angle | (Beamwidth)Half-power Beam Width@-3dB:1.1°±10%， Sharp Angle:2.6°±10% | ||
Housing Material | |||
Usage | Doppler current meter, underwater distance | ||
Installation Dimension | Checking product structure diagram below | ||
Protection Level | IP68 | ||
Weight | 10g±5％ | ||
Wiring Instructions | Red+，White-，Black: shielded wire； （temperature sensor is optional） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Doppler Effect Ultrasonic Flow meter Application:
The Doppler Effect Ultrasonic Flow meter use reflected ultrasonic sound to measure the fluid velocity. By measuring the frequency shift between the ultrasonic frequency source, the receiver, and the fluid carrier, the relative motion are measured.The Doppler flowmeter converts the measured frequency shift into a volumetric flow rate. The velocity of flow in the pipe is calculated using the frequency shift, the original frequency of the ultrasonic signal, the velocity of the sound through the emitter material, and the sine of the angle of the signal into the liquid. Once the velocity is known, the volumetric flow rate can be easily calculated by multiplying the velocity by the area of the pipe.
